Also name:Grade 2 titanium plate ,Grade 2 titanium sheet.
We can supply Commercially pure titanium grade 2 specifications as follows:
Thickness: 0.5-70 mm
The width:≤ 2000 mm
The length:≤ 6000 mm
Special requirements can be customized as customer’s requirement
Standard : ASTM B265  ASME SB265 ASTM F67  AMS 4911
Test report: MA, SGS, Â etc
Brand name:Â WIT
Commercially pure titanium grade 2 sheet features:
1. GR2 titanium plate is higher purity in pure titanium plate. Its ductility is slightly lower than Grade 1 titanium plate, and its hardness is slightly higher than Grade 1 titanium plate.
2. The purity is slightly lower than Grade 1 titanium plate, and the corrosion resistance is between Grade 1 titanium plate and Grade 3 titanium plate.
3. Higher physical and mechanical properties than GR1 titanium plate
4. Non-toxic, non-magnetic, no radiation, good biocompatibility.
Mechanical Properties
Grade |
Tensile strength, MPa (min) |
Yield strength, MPa (min) |
Elongation, %(min) |
Reduction of Area, %(min) |
Gr2 |
345 |
275-450 |
20 |
- |
Chemical Component
Grade |
Ti |
N, max |
C, max |
H, max |
Fe, max |
O, Â max |
Residuals |
|
Max  each |
Max  total |
|||||||
Gr2 |
Main |
0.03 |
0.08 |
0.015 |
0.30 |
0.25 |
0.1 |
0.4 |
Â
Application fields:
1. Â Chemical industry.
2. Â Electric power.
3. Â Navigation.
4. Â Medical and surgical implantation.
5. Â Other fields which require slightly higher physical performance to make equipment or accessories
Product picture
The artcraft of process titanium sheet:
Hot forging :A process of forging above the recrystallization temperature of a metal.
Hot rolling:A process of rolling at temperatures higher than recrystallization.
Cold rolling:AÂ process in which the plastic deformation temperature is lower than the recovery temperature.
Annealing:Â A process by which a metal is heated slowly to a certain temperature, held for sufficient time, and then cooled at a suitable rate, usually slowly, and sometimes controllably.
Pickling: to remove thin films such as oxides from the surface of a metal by immersing the product in an aqueous solution such as sulfuric acid.Is electroplating, enamel, rolling and other processes of pre - treatment or intermediate treatment
  Â
Commercially Pure Titanium Grade 2 production process
Our certificates
Our partners
http://www.wit-titanium.com/